 |
This power inverter can convert 20V ~ 30V DC power from a 24V battery ( Voltage range can be 20V ~ 30V) into
110V 60Hz AC power, which is similar to the power supplied from your home
electrical outlets.
This inverter is very small (8" x 4.3" x 2.4") and light weight(2.1 lb.)
With this DC to AC power inverter, you can power your
electronic devices with their original power adapters from a 24V battery. This inverter has been
specially designed to
be compatible with both 24V lead acid batteries and Lithium batteries with 24V
or 25.2V nominal voltages. Its input DC power voltage range can can be 20V ~ 30V.
Smart cooling fan : The inverter has a temperature controlled cooling fan that only turns on when the temperature reaches a certain level, and it will stop when the inverter cools down to a certain temperature.
Together with our portable 24V battery pack, this inverter provides an excellent portable power solution for any device that requires 300W or less power.
Compared to traditional inverters, which output modified sine waves, this inverter outputs AC power in pure sine waves, making it more similar to commercial power. Electronic appliances run cleaner, cooler, and quieter when running on pure sine power. As a result, pure sine inverters save energy costs and extend the life of appliances.
The pure sine inverter also reduces electronic interference, making it a
better alternative for operating sensitive audio/video equipment and medical
devices. Appliances with dimmers, speed controls, and certain battery chargers
may require pure sine power to operate.
Pure Sine Inverters are specially designed to increase the efficiency and
running time of electronic appliances and motors. Our I=inverters operate at less
than 3–5% of Total Harmonic Distortion (THD) on average and 90% efficiency
across the line.
Pure sine wave power inverter 300W Data Sheet:
Rated power: 300W
Peak power: 600W
DC input voltage: 24V
DC input voltage range: 20 ~ 30V
AC output voltage: 110VAC
AC output frequency: /60HZ ±1％
AC output waveform: Pure Sine Wave
Efficiency: ≥85%
Protective Function:
Low/Over voltage
Over load
Short circuit
Input reverse connection
Low voltage
Over temperature
Working Temp.: -10℃~45℃
Working Environment: Dry & ventilation
Storage Temp.: -30℃-70℃
Circuit board: Double sides welded circuit
Cooling Type: Channel cooling by fan
Cover material: Oxidized Aluminum Alloy
Dimensions:7.2" x 4.3" x 2..2" (180 x 110 x 55)
Weight: 2.1 lb (0.95 kg)
Important Note: The power inverter itself does not generate any power. All its power output is from the battery it's connected to. The power inverter just changes the power format and its efficiency rate is about 85%. This power inverter's rated output is 300W. However, the actual power output from the inverter is also limited by the battery output. To get 300W power from this inverter, the connected battery output need to be around 350W.
Inductive Loads, also called Lagging Loads or Inductive Load Banks or Inductive Reactive Loads or Power Factor Loads, are AC loads that are predominantly inductive in nature so that the alternating current lags behind the alternating voltage when the current flows into the load.
For example, Speakers present an inductive load that varies with frequency which can make it more difficult to deliver power than a purely resistive load (e.g., power delivery to a light bulb is easy because it does not store electrical energy and feed back that power).
If connecting with inductive loads (e.g. Compressor, Pump, old CRT TV, Refrigerator, Speakers, Ice conditioner, Air conditioner, Relays Fluorescent lamp, Vacuum cleaner), an inverter rate power should be 3-7 times higher than the load's rate power. For example, for a 150w refrigerator, you may need to choose a 500W ~1000w inverter ; for a 600w air conditioner, please choose 2000w inverter or higher.
|
|
|