Note: this battery maximum output is 300W. It is recommend to use with devices that need 300W or less power. If your bicycles or scooters require more than 300W power, do not use this battery.
Features:

Specifications:

Model No.	BX24H99B
Chemistry	Lithium-ion
Voltage	Nominal Voltage: 25.2 V Minimum Voltage: 20.5V Maximum Voltage: 29.75V
Capacity	12.72Ah @ 25.2V
Rate	320 Watt-hour
Configuration	7S4P
Inner Resistance	≤75 mΩ
Charge Voltage Limit	29.75 V
Max. Charge Current	3 A
Continuous Discharge Current	15 A
Burst Discharge Current (up to 10 minutes)	18 A
Size	175.00 x 110.00 x 75.00 mm ( or 6.8" x 4.3" X 3")
Weight	1.86 kg ( or 4.1 pound)
Operate Temp. Charge	0～45 ℃
Operate Temp. Discharge	-20～60 ℃
Storage Temp.	-20～40 ℃
Cycle Life	500 Times
PCB Safety Function	Cell balancing Over-discharge Over-current protection Over-charge Temperature protection Secondary protection

Small Size and Light Weight:

This battery only weighs around 3.8 pounds (same capacity Lead-Acid battery will be around 16 pounds).


Using a lithium-ion battery offers many advantages over older SLA (Sealed Lead Acid) batteries because of lithium-ion's high energy density, small size, and low weight. A typical lithium-ion battery has 1/4 of the weight and is 1/2 of the size of a same capacity traditional heavy bulky Sealed Lead Acid battery.

Package Contents:

The battery comes with an AC charger and output box. The AC charger can charge the battery from any 100-240V AC power source.

1. Battery with Flat Connection Box:



The output box can slide into the battery contact socket. Its output cable has 2 wires: red wire is +24V, black wire is ground.




2. Battery Bike Mount Output Connection Box:

If you are using this battery for a e-bike, you may select this output box. This output box comes with a lock for mounting on a bike or other devices.



Size: 95.00 x 89.00 x 59.00 mm (3.7" x 3.5" x 2.3")




The output box is lockable: if locked, it can not be removed from the battery. If unlocked, it can slide on/off the battery contact socket easily.




LED Display:

Safety Features:

• Water-resistant and firm ABS plastic casing.
• Built-in PCB protection.
• Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
• The internal pack is stabilized by braces, thereby avoiding mechanical accidents caused by vibration.

	The Four-level LED indicates current power status.		Battery can be recharged either by fastening on the bike or with the provided AC adapter.
	The LED (at the power button controls on/off of the battery) glows when power is on.		The key lock is used to fix the battery onto the holder.
	Battery can be installed easily. Simply slide the battery towards the holder by following the track		The Output Box KF542 is designed for multi-direction installation. User can change the position of battery (vertically / horizontally) by adjusting the clamp.

Warranty: One Year limited warranty. The one year limited warranty covers manufacturing and quality defects only. Please note that batteries wear out with use. The amount of charge a battery can hold gradually decreases due to usage and aging, and this issue is not covered by warranty.