BX-DD90M-24V

This small size, light weight, high efficiency DC to DC power adapter can convert 10 ~ 17v voltage DC input power to 24v voltage DC output power. It also has a 5V USB port that can provide a maximum of up to 2.4A current, which is enough to charge and power an iPad.

Features:

Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm)

Super light weight: only 2.54 oz (72g)

Super high efficiency: up to 96%

A regular DC converter efficiency is around 80% ~ 85%, which means 15% ~ 20% power will be used by the converter itself. For a 85% efficiency rate power adapter to deliver 90W power, it will take 106W power from a power source ( such as a battery). This DC Converter's efficiency rate is up to 96%, which means only around 4% power will be used by the converter itself. To deliver 90W power, it only needs 94W power from a power source.

Other features:

2.4A USB port can power and charge iPad,iPhone,Nokia and other different smart USB devices

Anti-explosion and anti-fire shell materials,security and ecology

Multiple protections: short circuit, over current, over voltage, over temperature

Specifications:

-Acceptable Input Voltage: 9V ~ 17V DC
-Output Voltage: 24V; Maximum Output Power: 90W.
-USB output: 5V , 2.4A
-Dimensions: 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm)
-Weight: 2.54 oz (72g)
-Maximum Operating Temperature verses load current: 0℃ to +40℃ Current 6A max.（ Full Load, the body temperature is 0℃ to +85℃ )
-Minimum Operating Temperature: 0℃
-Operating Relative Humidity range and any qualifiers: 20%RH to 80%RH .
-Maximum Storage Temperature: +70℃
-Minimum Storage Temperature: - 20℃
-Storage Relative Humidity range and any qualifiers: 10%RH to 90%RH non-condensing @ Sea level shall be low 10,000 feet
-Ripple and noise/: ≤300mV

Package contents:

BX-DD90M 90W Mini Size DC to DC Power Adapter x1
24V Output Cable x 1

There is a small flat surface on output cable end that has 3 holes. Plug this end to converter output. When plug output cable to converter output port, the flat surface area is face up to converter top.

Optional Accessories:

1. Output connector tips:

Each output cable output end is a 5.5 x 2.5mm male connector. This 5.5 x 2.5mm connector can be changed to a different connector by plugging a C series connector tip over it.

2. Input Cable:

The DC converter Input polarity is positive. Input port is a 5.5 x 2.5mm Female Jack

You may use any cable with 5.5 x 2.5mm male connector as input cable, such as BiXPower 5.5 x 2.5mm Male Barrel Power Connector with Wires - 525M:

BiXPower Z6 Cable, Y9 Cable and CR15D also can be used as this DC Converter Input cable.