Super High Capacity Long Lifetime Battery with UPS Function for ResMed AirSense 10 CPAP Machine CP250-S10

Super High Capacity Long Lifetime Battery for ResMed AirSense 10 CPAP Machine with UPS Function

You may use the battery independently to power a CPAP machine.

This power pack can power ResMed AirSense 10 CPAP machines for 3 ~ 4 nights with the humidifier turned off. It works with the following AirStart™ 10, AirSense™ 10, and AirCurve™ 10 machines manufactured by ResMed:

• AirStart™ 10 CPAP with HumidAir™ Heated Humidifier
• AirStart™ 10 Auto CPAP with HumidAir™ Heated Humidifier
• AirSense™ 10 CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 Elite CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet CPAP Machine with HumidAir™ Heated Humidifier
• AirSense™ 10 AutoSet for Her CPAP Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier
• AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier

Special 24V DC Power Converter for ResMed Airsense 10 devices:

Features:

Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm)

Super light weight: only 2.54 oz (72g)

Super high efficiency: up to 96%

Super quiet: Fan-less design

Specifications:

Input:

Input Voltage: 10V ~ 21V DC

Input Connector: 5.5 x 2.5mm Barrel

Connector Input Polarity: Positive

Output:

Output voltage: 24V DC

Maximum output: 90W ( 3.75 Amps @ 24V)

Output connector: Special connector for ResMed S10

Output cord length: 70" with ferrite

Adapter Dimension: 3" x 2" x 1"

Adapter weight: 6 oz

Battery Features:

12.8V 20Ah Lithium Iron Phosphate (LiFePO4) Portable Rechargeable Battery

High Capacity: This battery capacity is 256 Watt-hour( 12.8V 20Ah)

Light Weight: This battery only weighs 5.6 pounds. A same capacity lead acid battery may weigh 13 pounds

This battery has two Input/Output connectors. You may use them to charge battery or get power from battery. One end is 5.5 x 2.5mm female connector with positive polarity ( Inside positive, outside negative/ground). Another end has two wires with Anderson Power Pole connector. Red Wire is positive, Black wire is negative/ground.

Carry bag:

Lithium Iron Phosphate (LiFePO4)Pros:

Long life span (5-10 years) vs lead acid (1-3 years), depending on depth of discharge and assuming that the cycle limit doesn't kill the battery first Longer cycle life, as LiFePO4 batteries last 1,000 to 3,000 charge and discharge cycles, compared to similarly sized lead-acid batteries, which can range from 200 - 1000 cycles (again, assuming depth of discharge is within recommended limits for both battery types).

Very safe - the odds of a "thermal runaway" (aka battery fire) are very low. The same can not be said of other lithium ion chemistry.

Specifications:

Model No.	LF1220
Chemistry	Lithium Iron Phosphate (LiFePO4)
Voltage	Nominal Voltage: 12.8 V Minimum Voltage: 10V Maximum Voltage: 14.6V
Capacity	20Ah /256 Watt-hour
Continuous Discharge Current	20 A
Maximum Discharge Current	25 A
Size	7.1" x 6.5" x 3" ( 178 x 165 x 75 mm)
Weight	5.6 lb
Operate Temp. Charge	0～45 ℃
Operate Temp. Discharge	-20～60 ℃
Storage Temp.	-20～40 ℃
Cycle Life	2000 Times
PCB Safety Function	Cell balancing Over-discharge Over-current protection Over-charge Temperature protection Secondary protection

Charge the battery:

This battery can be charged from any 100V ~ 240V, 50Hz/60Hz AC power source with the battery AC charger. It only takes around 3 hours to fully charge the battery

Package Contents:

One Battery with battery bag
One ResMed S10 DC Converter with connection cable
One AC Charger with Power Cord

Company

Shopping

My Account

Help