Battery Features:


High Capacity: The battery has a capacity of 192 Watt-hours (14.8V @ 13Ah, or 52000mAh).





Light Weight: This battery only weighs about 2.75 pounds. A typical Lead Acid battery with similar capacity would be around 15 pounds. Specifications:

Model No.	CP190-15V
Chemistry	Lithium-Ion
Voltage	Nominal Voltage: 14.8 V Minimum Voltage: 10V Maximum Voltage: 16.8V
Capacity	192 Watt-hour
Continuous Discharge Current	10 A
Maximum Discharge Current	12 A
Size	5.8" x 4.8" x 2.5" ( 148 x 125 x 62 mm)
Weight	2.75 lb ( 1.24kg)
Operate Temp. Charge	0～45 ℃
Operate Temp. Discharge	-20～60 ℃
Storage Temp.	-20～40 ℃
Cycle Life	500 Times
PCB Safety Function	Cell balancing Over-discharge Over-current protection Over-charge protection Temperature protection Secondary protection

Charge the Battery:

The battery pack can be charged from any 100-240V AC power outlet with the AC charger.



Caution: Please only use BiXPower authorized chargers with correct settings to charge the battery. Other chargers may damage the battery and can cause fire. This battery 's charging voltage is 16.8V ~ 17.1V, and the maximum charging current is 5A. The charge port connector is a 5.5 x 2.5mm barrel connector with positive polarity. If you do not have the correct charger for this battery, please order the battery with the AC charger.

Battery Applications

1. Use the battery directly:

The battery pack comes with a output cable. One end plugs to the battery output port while the other end can plug directly into your device, or into many different connector tips if the plug does not fit.

The battery's output voltage range is 10V ~ 16.8V, and its nominal voltage is 14.8V. When the battery is fully charged, its output voltage is 16.8V. The output voltage will decrease gradually and finally will cut off at around 10V. Most of the time, the voltage will be around 14V to 16V.

Because of this, please make sure your device can accept all voltages from 12V ~ 16.8V.

2. Use the battery with the BiXPower DC to DC Power Converter




Specifications:

Input:
Input Voltage: 9V ~ 16V DC
Input Connector: Car Cigarette Male Plug
Input Polarity: Positive
Input cord length: 14"

Output:
Output voltage: 19V DC
Maximum output: 120W / 6.3A
Output connector: 5.5 x 2.5mm Male
Output cord length: 40" with ferrite
Output polarity: Positive
Adapter Dimension: 4.9" x 2.3" x 1.3"
Adapter weight: 11 oz


To get 19V output, just plug 19 DC converter to battery output socket:

This 19V DCto DC power converter can also be used to provide 19V voltage DC power from 12V standard cigarette lighter sockets. It can provide up to a maximum of 120W.


Standard Package Contents:



CP190 Battery x1
Battery AC Charger with power cord x 1
19V 120W DC Converter x 1

The 19V output connector is a 5.5 x 2.5mm male connector like this:


Optional 12 Popular connector tips :



If the output connector of this adapter does not fit your device, you can use BiXPower C series DC power connector tips to change the connector to a different size like this:

For example, With a BiXPower C5 Connector Tip (6.0x3.0mm connector tip), this battery will be compatible with many Zebra printers that come with a 24V power adapter.


CAUTION: This adapter's input polarity and output polarity are both positive, which means inside should be positive voltage, outside should be ground.

Warranty: One Year limited warranty. The one year limited warranty covers manufacturing and quality defects only. Please note that batteries wear out with use. The amount of charge a battery can hold gradually decreases due to usage and aging, which is normal, and this is not the issue covered by warranty.