 |
This package comes with BiXPower BP100 battery, a high capacity (99.6 Wh), small size ( 180 x 110 x 22.5mm or 7.2" x 4.2" x 0.9"), light weight (621g or 1.4 lb) lithium ion rechargeable battery, a Special Cable that is specially designed for a ResMed AirSense 11 CPAP machine. It can power ResMed AirSense 11 CPAP machines.
It may provides 1-2 nights of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief disabled. However, it is just a very rough estimation. AirSense 11 CPAP Machine power drawing varies a lot at different setting and running environment. For example, machine may only draw 10W ~ 12W power at very low pressure setting, battery can last 8 hours. The machine may draw 20W ~ 25W power at moderate setting , then battery can only last 4 hours. To maximum battery running time, please turn off CPAP Machine humidifier and heater, set the pressure as low as possible (with your doctor approval).
The battery pack Package comes with one BP100 battery + One ResMed AirSense 11 Special Cable + AC Charger + Car Charger
To use this battery with ResMed AirSense 11 , just plug in the special cable to battery Port I, then connect it to CPAP machine
Battery compact size allows it to easily fit into a laptop/notebook carry bag.
Battery Specifications:
|
Model:
|
BP100
|
|
Capacity:
|
99.6 Watt-Hour
|
|
Battery Cell:
|
Lithium-ion
|
|
Input Charging Port:
|
Input Voltage Range: DC 12 ~ 24V. Connector Size: 5.5 x 2.5mm
|
|
Outputs:
|
Port I:
Output Voltage: 16V, 19V or 24V selectable
Output Connector Size: 5.5 x 2.5mm
Maximum Output Current: 4A @16V, 3.5A@19V, 2.5A@24V
Port II: Nominal Output Voltage 11.1V
Output Voltage Range 9V ~ 12.6V
Output Connector Size: 3.5 x 1.35mm;
>Maximum Output Current: 5A
Port III: 5V USB Port; Maximum Output Current: 2.A
Total maximum output with all 3 outputs: 65W
|
|
Charging time /Temperature
|
4-6 hours / 0～45 ℃
|
|
Size
|
180 x 110 x 22.5mm ( or 7.2" x 4.2" x 0.9")
|
|
Weight:
|
621g ( or 1.4 lb)
|
|
Power Indicator:
|
4 level LED indicator
|
|
Built-in Protection Circuit:
|
-Over-charge ; Over-discharge; Over current ;Over temperature
- Short circuit protection
|
|
Operating Temperature:
|
-20～ 60 ℃
|
|
Storage Temperature:
|
- 20～40 ℃
|
This battery is made with high quality Li-ion battery cells and is compatible with many devices . Set the output voltage at 24V DC, with specially designed cable, it can power ResMed S10 series CPAP Machines.
This Universal External Lithium Rechargeable Battery Pack can provide power for laptop computers, digital cameras, digital photo frames, PDAs, cell phones, DVD players.
This battery features 3 output ports.
Output Port I
Output Port I features 3 different regulated voltages through a hardware volt selection switch: 16V, 19V, 24V. This port can be used to power laptop notebook computers. Please set the port I output voltage close to your laptop power adapter output voltage or laptop's input voltage.
Output III is a 5V USB port. Its maximum output current is 2.1A, which can be used to power or charge iPad, tablet computers and any other device that can be charged from a USB port (USB power cable not included).
Charge the battery: This battery can be charged from any 100V ~ 240V, 50Hz/60Hz AC power source with the battery AC charger.
You may also charge battery from a 12V car cigarette socket:
This battery has built-in charging controller to control the charging process. It can accept a very wide range of voltage for charging. You can use a regular power adapter with 12V to 24V DC power to charge the battery. The battery charge port is a 5.5 x 2.5mm female jack, therefore a 5.5 x 2.5mm male connector is required.
Package Contents:
BiXPower BP100 battery x1
AC Charger x 1
Car Charger x 1
AirSense 11 Power Cable: x 1
Battery Running Time:
Battery running time is depending on CPAP Machine setting (such as CPAP pressure, breathing rate, optimal mask seal and whether humidifier, heated tubing and exhalation pressure relief disabled) and running environment. AirSense 11 CPAP Machine power
drawing varies a lot at different
setting and running environment.
For example, machine may only draw 10W
~ 12W power at very low pressure setting,
battery can last 8 hours. The machine may draw 20W ~ 25W power at moderate setting , then
battery can only last 4 hours.
To maximum
battery running time, please turn off CPAP Machine humidifier and heater, set
the pressure as low as possible (with your doctor approval).
If you need more running time, you may choose our two batteries pack at:
BP100 X2 High Capacity ( 100Wh x2 = 200Wh) Batteries for ResMed AirSense 11 CPAP Machine
or:
Super Capacity (300 Wh) Battery Pack for ResMed AirSense 11 CPAP Machine
|
|
|