Power any device anytime, anywhere by using its own AC power adapter.

This power station comes with a super high capacity light weight rechargeable lithium ion battery ( 36V 11.6Ah or 418Wh) and a 600W power inverter that converts the battery power to 10V AC power. Just link the power inverter to the battery, then plug your device's AC power adapter to the power inverter


Note: Although the inverter rated maximum output can reach 600W, its actual output wattage is limited by battery. In this combo, maximum output power is around 400W power.

Although integrating battery and AC inverter together in one unit may be convenient to, there are many benefits in not doing so:

1. Heat is the worst enemy of lithium ion batteries. The AC inverter may generate a lot of heat. If you integrate the battery with the AC inverter in one unit, the battery will work in a hotter environment. This will reduce battery life time and also cause some safety concerns.

2. When the battery and inverter are two separate units, it will be much easier to replace/upgrade either one.

Battery Features:

Small Size and Light Weight:

This battery weighs only around 5 pounds.

Using a Lithium-ion battery offers many advantages over older SLA (Sealed Lead Acid) batteries because of Lithium-ion's high energy density, small size, and low weight. A typical Lithium-ion battery may only be 1/5 of the weight and 1/2 of the size compared to a same capacity traditional heavy bulky Sealed Lead Acid batter.

LED Display:

The Four-level LED indicates current power status.

AC Charger:

This battery comes with its own AC charger that can charge the battery from any 110V ~ 240V AC power source.


Safety Features:

• Water-resistant and firm ABS plastic casing.
• Built-in PCB protection.
• Prevent short circuit, over-current, over-heat, over-charge, over-discharge.
• The internal pack is stabilized by braces, thereby avoiding mechanical accidents caused by vibration.

Specifications:

Model No.	BX3691B
Cell Brand	Panasonic
Chemistry	Lithium-ion
Voltage	Nominal Voltage: 37 V Minimum Voltage: 30V Maximum Voltage: 42.5V
Capacity	11.6Ah @ 36V
Rate	418 Watt-hour
Configuration	10S4P
Inner Resistance	≤75 mΩ
Charge Voltage Limit	42.5V
Max. Charge Current	2 A
Continuous Discharge Current	13 A
Burst Discharge Current (up to 10 minutes)	15 A
Size	7.5" x 5" X 3.8" ( or 180 x 123 x 92mm)
Weight	2.33 kg (or 5.1pounds)
Operate Temp. Charge	0～45 ℃
Operate Temp. Discharge	-20～60 ℃
Storage Temp.	-20～40 ℃
Cycle Life	500 times
PCB Safety Function	Cell balancing Over-discharge Over-current protection Over-charge Temperature protection Secondary protection

Power Inverter Features:

The power inverter converts the battery DC power to 110V AC power. It has a universal AC output socket that can accept any style of AC plugs. The inverter's maximum output can be as high as 600W. Output wave form is pure since wave.





Smart cooling fan : The cooling fan will only work when it is needed.



This inverter is very small (9.5" x 4.5" x 2.3") and light weight(2.3lb.) It is very easy to carry.





The inverter can easily connect to BiXPower 36V battery





3-hole AC socket which accepts both 2-pin and 3-pin AC plugs.

Note: Although the inverter rated maximum output can reach 600W, its actual output wattage is limited by battery. In this combo, maximum output power is around 400W power.

The power inverter has a specially designed connector that can easily link to the battery.

Advantages of Pure Sine Wave inverters over modified sine wave inverters:
a) Output voltage wave form is pure sine wave with very low harmonic distortion and clean power like utility-supplied electricity.
b) Inductive loads like microwave ovens and motors run faster, quieter and cooler.
c) Reduces audible and electrical noise in fans, fluorescent lights, audio amplifiers, TV, Game consoles, Fax, and answering machines.
d) Prevents crashes in computers, weird print out, and glitches and noise in monitors.
e) Reliably powers the following devices that will normally not work with modified sine wave inverters:
Compared to traditional inverters, which output modified sine waves, this inverter outputs AC power in pure sine waves, making it more similar to commercial power. Electronic appliances run cleaner, cooler, and quieter when running on pure sine power. As a result, pure sine inverters save energy costs and extend the life of appliances.

The pure sine inverter also reduces electronic interference, making it a better alternative for operating sensitive audio/video equipment and medical devices. Appliances with dimmers, speed controls, and certain battery chargers may require pure sine power to operate.

Pure Sine Inverters are designed to increase the efficiency and running time of electronic appliances and motors. Our Inverters operate at less than 3–5% of Total Harmonic Distortion (THD) on average and 90% efficiency across the line.